Tactile warning signs
Marker boards for the blind and visually impaired
Anti-slip and marking strips
Warning tactile signs are markings with blocks of physical bumps that are used to warn the pedestrian of danger or the need to change the direction. They are perceived by the pedestrian through soles or by using the white cane that identifies bumps and leading lines.
Warning tactile signs are placed in the form of a warning strip or block. The strip must be at least 60 cm wide in the walking direction, while the length depends on the particular situation. Warning signs are placed to distinguish between the sidewalk and carriageway, on multi-level crossings over the railway, in front of various obstacles, stairs or if the change of direction is needed.
All our tactile signs are in accordance with SIST 1186 Standard.
Concrete
Thermoplastic
Metal
- New generation tactile signs with additional safety features
- Meet all required standards
- Safe, easily detectable and highly contrasted
- UV resistant
- Resistant to temperature differences and extreme weather conditions
- Pre-installed 3 mm wide spacers, no grouting necessary (but can be done)
- Suitable for pedestrian areas, crossings, streets, crossroads, bus and train stations, squares, parking lots, promenades, swimming pools, etc.
Easycross 2.0 concrete warning tactile sign
- New generation tactile signs with additional safety features
- Meet all required standards
- Safe, easily detectable and highly contrasted
- Contain class particles/reflectors for improved visibility even in dark and bad weather conditions
- Anti-dust coating
- Anti-slip surface
- UV resistant
- Resistant to temperature differences and extreme weather conditions
- Concrete quality C30/70, XF4
- Pre-installed 3 mm wide spacers, no grouting necessary (but can be done)
- Suitable for pedestrian areas, crossings, streets, crossroads, bus and train stations, squares, parking lots, promenades, swimming pools, etc.
Color: white
Distance between bumps 37,5 mm (axis to axis)
Bump height:5 mm, , bump width: 32 mm
Dimensions: 30 x 30 x 8cm
Standard: SIST 1186
ZBO 21 Concrete warning tactile signs
- Made in Slovenia
- Meet all required standards
- Safe, easily detectable and highly contrasted
- UV resistant
- Resistant to temperature differences and extreme weather conditions
- Pre-installed 3 mm wide spacers, no grouting necessary (but can be done)
- Suitable for pedestrian areas, crossings, streets, crossroads, bus and train stations, squares, parking lots, promenades, swimming pools, etc.
Color: white, grey
Distance between bumps: 37,5 mm (axis to axis)
Bump heigh:5 mm, bump width 32 mm
Dimensions: 30 x 30 x 8cm
Standard: SIST 1186
- For indoor and outdoor use
- Indoor signs are self-adhesive, the outdoor ones are glued with a two-component adhesive
- Available in different colors
- Easy to install
- Fit nicely to the surface
- Very resistant and durable
- The outdoor ones are suitable for asphalt or concrete surfaces; two-component adhesive is used
- The indoor ones are self-adhesive and suitable for all flat surfaces
- Reliable adhesive for perfect adhesion
- Anti-slip surface
- Laid on clean and fully dry surface (on asphalt or concrete 30 days after laying the surface)
- Use of primer is recommended for asphalt or concrete
Standard: SIST 1186
TPUP K3 warning tactile signs
- For outdoor use
- Made of thermoplastic polyurethane
- Suitable for streets, squares, street crossings, rail and bus stations, airports, court buildings, museums, hospitals, healthcare centers, commercial buildings, schools, multiapartment buildings, shopping centers, etc.
- Panels with horizontal bumps
- Bump edges are beveled at 45°
- Available in several colors
- Easy installation with two-component adhesive
- Fit nicely to surface
- Very resilient and durable
- Anti-slip surface
- Laid on clean and fully dry surface (on asphalt or concrete 30 days after laying the surface)
- Use of primer is recommended for asphalt or concrete
Dimensions: 300 x 300 mm
Colors: 11 RAL colors available
Standard: SIST 1186
ME 22 warning tactile signs
- For indoor and outdoor use
- Bumps with a flat top (truncated cone)
- Indoor signs are self-adhesive, the outdoor ones are glued with a two-component adhesive
- Easy to install
- Fit nicely to the surface
- Very resistant and durable
- The outdoor ones are suitable for asphalt or concrete surfaces; two-component adhesive is used
- The indoor ones are self-adhesive and suitable for all flat surfaces
- Reliable adhesive for perfect adhesion
- Several color combinations available
- Anti-slip surface
- Laid on clean and fully dry surface (on asphalt or concrete 30 days after laying the surface)
- Use of primer is recommended for asphalt or concrete
Dimensions: 600 x 600 mm, 600 x 300 mm
Colors: several color combinations available
Standard: SIST 1186
Color combinations for 600 x 600 mm:
- White surface/white bumps
- White surface/black bumps
- White surface/yellow bumps
- White surface/grey bumps
Color combinations for 600 x 300 mm:
- White surface/white bumps
- White surface/black bumps
- White surface/yellow bumps
- White surface/grey bumps
- Yellow surface/white bumps
- Yellow surface/black bumps
- Yellow surface/yellow bumps
- Yellow surface/grey bumps
- Black surface/white bumps
- Black surface/black bumps
ME 20 TSB warning tactile signs
- For outdoor use
- Used to distinguish between bicycle paths and footpaths, to mark rail platforms, bus stops, pedestrian crossings, staircases, etc.
- Round bumps 25 mm in diameter.
- Several color combinations available.
- Used to distinguish between pedestrian and bicycle paths.
- Separation strip prevents the visually-impaired people from accidentally stepping on the bicycle lane.
- Placed on an existing pavement or path, making the installation easy, fast and cost-effective (the path is open for pedestrians in a few hours).
- Two-component adhesive is used
Dimensions: 900 x 303 mm
Colors: several color combinations available
Standard: SIST 1186
Color combinations for 900 x 303 mm:
- White surface/white bumps
- White surface/black bumps
- White surface/yellow bumps
- White surface/grey bumps
IZIPLOT warning tactile signs 32 bumps
- For indoor use
- Simple and easy installation
- Self-adhesive bumps in transparent plastic mounting plate
- Aesthetically great solution and good visual contrast
- Good mechanic, chemical and thermal resistance
- Injected techno-polymer
Dimensions: 35 x 3.5 mm
Transparent mounting plate: 300 x 300 mm (32 bumps)
Tactile line width: 300 x 300 mm
Use: : indoor spaces
Installation: no additional adhesive necessary. The surface must be cleaned thoroughly before installation.
Color: : black, grey, white
Standard: SIST 1186
IZIPLOT warning tactile signs with 50 bumps
- For indoor use
- Simple and easy installation
- Self-adhesive bumps in transparent plastic mounting plate
- Assembled by a single person, without additional adhesives and tools
- Good mechanic, chemical and thermal resistance
- Injected techno-polymer
Dimensions: 25 x 3.5 mm
Transparent mounting plate: 300 x 300 mm
Tactile line width: 300 x 300 mm
Use: indoor spaces
Installation: no additional adhesive necessary. The surface must be cleaned thoroughly before installation.
Color: : black, grey, white
Standard: SIST 1186
IZIPLOT EXP warning tactile signs with 32 bumps
- For indoor use
- Simple and easy installation
- Self-adhesive bumps in transparent plastic mounting plate
- Aesthetically great solution and good visual contrast
- Assembled by a single person, without additional adhesives and tools
- Good mechanic, chemical and thermal resistance
Materials: injected techno-polymer, stainless steel, aluminum, brass
Dimensions: 25 x 5 mm
Transparent mounting plate: 313 x 313 mm
Tactile line width: 300 x 300 mm
Use: : indoor spaces
Installation: no additional adhesive necessary. The surface must be cleaned thoroughly before installation.
Color: black, grey, stainless steel, aluminum, brass
Standard: SIST 1186
IZIPLOT EXP tactile signs with 33 bumps
- For indoor use
- Simple and easy installation
- Self-adhesive bumps in transparent plastic mounting plate
- Aesthetically great solution and good visual contrast
- Assembled by a single person, without additional adhesives and tools
- dobra mehanična, kemična in toplotna odpornostGood mechanic, chemical and thermal resistance
Materials: : injected techno-polymer, stainless steel, aluminum, brass
Dimensions: 25 x 5 mm
Transparent mounting plate: 420 x 225 mm
Tactile line width: 400 x 210 mm
Use: indoor spaces
Installation: no additional adhesive necessary. The surface must be cleaned thoroughly before installation.
Color: black, grey, inox, aluminum, brass, inox/polymer, brass/polymer
Standard: SIST 1186
IZICLOU warning tactile signs
- For indoor and outdoor use
- Simple and fast installation, no glueing
- Bumps are hammered into drilled holes
- Timesaving, no need to wait for drying and hardening of the material
- Holes are drilled by using a template
- Holes have a diameter of 11 mm and depth of 30 mm
- UV resistant
- Resistant to large temperature variations and extreme weather conditions
- Excellent mechanical, chemical and thermal resistance
- Do not retain heat even at high temperatures, and thus do not burn guide dog’s paws
- Suitable for various surfaces: asphalt, granite, marble, concrete, tiles, wood, etc.
Materials: injected polymer, inox
Dimensions: 25 x 5 mm
Pin length: 25 mm
Use: : indoor and outdoor spaces
Installation: no additional adhesive necessary. Fast and simple installation using the template.
Color: black, grey, white, inox
Standard: SIST 1186
ALU warning tactile signs
- Warning tactile signs made of aluminum
- For indoor and outdoor use
- Simple and fast installation
- Self-adhesive or with bumps
- Aesthetically great solution and good visual contrast
- Ground with tactile signs can also be cleaned mechanically
- Good mechanical, chemical and thermal resistance
Materials: aluminum
Warning signs dimensions: 35 x 4 mm
Installation: Self-adhesive or with plugs hammered into previously drilled holes
Color: aluminum
Standard: SIST 1186
INOX warning tactile signse
- Inox warning tactile signs made
- For indoor and outdoor use
- Simple and fast installation
- Self-adhesive or with bumps
- Aesthetically great solution and good visual contrast
- Ground with tactile signs can also be cleaned mechanically
- Good mechanical, chemical and thermal resistance
Materials: inox AISI 316
Warning signs dimensions: 35 x 4 mm
Installation: Self-adhesive or with plugs hammered into previously drilled holes
Color: inox
Standard: SIST 1186